-
Weaving Twill
Weaving Twill
The twill weave structure offers endless design options for the weaver. In this class, you will learn to read a twill pattern and choose your favorites to incorporate into your own woven sampler towel.
35 events found.
Calendar of Events
S Sun
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
2 events,
-
Chair Caning
Chair Caning
Spend a few days learning how to cane your own chair during which you'll learn how to weave the traditional 7-step caning pattern. Bring along a chair in good condition in need of a new caned seat. Ideally, the chair seat will be square or rectangular in shape and have fewer than 85 holes drilled into the seat frame. Any repairs and refinishing should be completed before the class begins. Please bring a chair in sound condition, with the old cane removed, if possible.
3 events,
-
Weaving Twill
Weaving Twill
The twill weave structure offers endless design options for the weaver. In this class, you will learn to read a twill pattern and choose your favorites to incorporate into your own woven sampler towel.
-
Chair Caning
Chair Caning
Spend a few days learning how to cane your own chair during which you'll learn how to weave the traditional 7-step caning pattern. Bring along a chair in good condition in need of a new caned seat. Ideally, the chair seat will be square or rectangular in shape and have fewer than 85 holes drilled into the seat frame. Any repairs and refinishing should be completed before the class begins. Please bring a chair in sound condition, with the old cane removed, if possible.
-
Introduction to Chip Carving
Introduction to Chip Carving
This course will introduce students to the traditional craft of chip carving - a type of woodcarving in which a small knife is used to incise decorative floral and geometric designs into basswood or butternut. The design is created by the removal of small pieces (chips) of the wood. Chip carving is an ancient, traditional craft. Chip carved plates, jewelry and keepsake boxes, trays, breadboards, furniture and other items can make wonderful gifts and also decorate the home with traditional motifs. Some previous carving experience is helpful, but not necessary. Students will learn to carve a variety of practice designs already drawn on a board and may complete a round ornament as well.
3 events,
-
Chair Caning
Chair Caning
Spend a few days learning how to cane your own chair during which you'll learn how to weave the traditional 7-step caning pattern. Bring along a chair in good condition in need of a new caned seat. Ideally, the chair seat will be square or rectangular in shape and have fewer than 85 holes drilled into the seat frame. Any repairs and refinishing should be completed before the class begins. Please bring a chair in sound condition, with the old cane removed, if possible.
-
Introduction to Chip Carving
Introduction to Chip Carving
This course will introduce students to the traditional craft of chip carving - a type of woodcarving in which a small knife is used to incise decorative floral and geometric designs into basswood or butternut. The design is created by the removal of small pieces (chips) of the wood. Chip carving is an ancient, traditional craft. Chip carved plates, jewelry and keepsake boxes, trays, breadboards, furniture and other items can make wonderful gifts and also decorate the home with traditional motifs. Some previous carving experience is helpful, but not necessary. Students will learn to carve a variety of practice designs already drawn on a board and may complete a round ornament as well.
-
Viking Knife
Viking Knife
The student will hand forge a small Viking Knife, also called a blacksmith knife. The knife is a one piece, all metal design with an integral handel. The clade will be heat treated, ground and sharpened in class. This one-day class will cover the basic theory and practice of knife making and is a good introduction for the beginner.
1 event,
-
Quilt Block Party
Quilt Block Party
In this series of classes, a new quilt block will be introduced each month along with the techniques used to cut, piece, and construct the quilt block. Color is an important component to block and quilt design. Examples will be presented for each block to help you create a quilt that is pleasing to your personal color and style. Each offering can stand on its own, so take one, a few or all five! Students should have some basic knowledge of sewing prior to taking this class.
May 14: Log Cabin Quilt Block – A nice beginner block to practice the mastery of the ¼” seam and the skill of squaring off the block as it builds in size. The technique to sandwich the quilt layers will be taught as well as completing the quilt with a bias binding. Students will use their blocks to create placemats.
June 11: Four Patch Star Quilt Block – This is a well-known traditional block with many variations. We will look at the variations and dream of future quilting possibilities. Students will learn several methods to cut and sew half square and quarter triangles; the building block for an endless variety of quilt blocks. Sewing techniques will be shared and practiced to create the points of the star. You will also learn how to complete a pillow with or without a zipper.
July 9: Traditional Basket Block – This is another traditional block that will use the skills taught in the Four Patch Star Block Party. Variations in color will often make this block a popular choice for seasonal quilts and table runners. Several examples will be shared. New sewing and quilting techniques in this class will include placing blocks on point, sashing, and adding a sleeve to make this a wall hanging.
August 13: Blazing Star- The Blazing Star Quilt Block is spectacular and will use the skills acquired in previous block parties. You will be surprised to learn that the challenge to this clock comes in organizing your pieces before you sew each block, the sewing should no longer be your challenge.
September 10: Maple Leaf Block – A traditional block that is very popular in quilts and seasonal table runners and wall hangings. Just in time for Autumn in the Adirondacks, create your own display of fall leaves in a quilted project for your home.
1 event,
-
AFS Sewing Circle
AFS Sewing Circle
Calling all fiber artists! Do you have a project you're in the middle of? Want some company while you work? Sounds like AFS Sewing Circle is the place for you! Quilters, knitters, and fiber artists alike are welcome to join us every month for an afternoon of quilting and camaraderie. Bring your works in progress, and enjoy sharing your experience and the company of your fellow quilters. Pre-registration is not required. All are welcome!
1 event,
-
Copper Bowl
Copper Bowl
In this class students will create a beautiful copper bowl from a 12" x 12" sheet of 16-gauge copper. Students will pound and hand tool the sheet into an 9" diameter, approx. 2" deep bowl. Students will also make a decorative vine with leaves from copper that will be attached to the rim of the bowl. Some soldering will be involved in this class.
2 events,
-
The History of Artisan Cheese in New York
The History of Artisan Cheese in New York
In this class students will take a trip through history as they learn about how Artisan Cheese developed from the 1800s through the present day. Students will have the opportunity to taste many of the New York cheeses discussed. Specific focus will be placed on the Adirondack Crescent Region. Please note: Students will check in at the Folk School, 51 Main Street, Lake Luzerne, NY. They will then travel to Nettle Meadow's Plant/Tasting Room 1256 Lake Ave., Lake Luzerne, NY for the duration of the class.
-
Herbal Spa Day
Herbal Spa Day
In this class we will explore recipes for rejuvenation and relaxation. Using plants and other natural ingredients, we'll make and apply an herbal treatment for face, hands, and Feet for a head-to-toe pampering experience.
2 events,
-
Woodturned Lidded Boxes
Woodturned Lidded Boxes
In this class, students will learn to turn a cylindrical box and then turn a lid for the box, all from the same piece of wood. Students will learn tricks to making a good lid and will leave the class with a nice box for all sorts of collections!
-
Beginning Spinning
Beginning Spinning
Spinning, the ancient art of twisting fibers to make yarn or thread, still thrives today, and this workshop will show you how to bring its magic into your own creative practice. In this workshop, you will learn how to spin wool using spindles and a spinning wheel and hear stories and folklore about spinning while you practice. You will learn the basics of spinning, how to work with the properties of wool, and how to ply and finish the yarn you have spun. No experience is necessary.
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
2 events,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
-
Open Forge Night
Open Forge Night
Interested in blacksmithing but unsure how to start? Open Forge Night is the place for you! Every third Wednesday of the month during our blacksmithing season, come see demonstrations by expert blacksmith Steve Gurzler. Observing the demonstration is free and open to the public. If you want to try your hand at blacksmithing there is a $20 fee to cover the cost of materials. Safety precautions must be followed - including hard shoes with no open toes, long pants, goggles (supplied) and gloves (supplied).
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
3 events,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
-
Stained Glass for Beginners
Stained Glass for Beginners
In this workshop we will complete a small Tiffany style suncatcher, ornament, or flower. Students will be able to choose a pre-drawn pattern from a variety of designs and be guided as they learn to cut the glass (chosen from a variety of types and colors), smooth the glass pieces with a grinder, apply copper foil tape, solder the pieces together into the final piece using lead-free solder, and add jump rings or a copper wire stem. The patterns available will offer a variety of levels of difficulty so students may choose what best suits them.
-
Blacksmithing 107: Make a Forged Leaf Key Ring
Blacksmithing 107: Make a Forged Leaf Key Ring
This 4 hour class is ideal for the beginner blacksmith with little to no experience. We’ll explore basic techniques first, then move on to forging leaves to create a decorative leaf keychain. ABANA
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
1 event,
-
Traditional Soap Making
Traditional Soap Making
Create soap just like Grandma, but better! Join Chrissey for an enjoyable Sunday afternoon as you learn how to make soap that not only smells good but is all-natural and feels great on your skin. This fun class will teach you how to create soap using the cold-process and natural/organic ingredients. You will learn all about the basic process, oils, and the difference between fragrances and essential oils. You will create soap from a recipe while learning how to handle lye safely. Finally, you'll take home your hand-made soap. So, say good-bye to store-bought soap and start using soap you made yourself!
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
1 event,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
2 events,
-
Build a Wee Lassie Canoe
Build a Wee Lassie Canoe
The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.
-
Puukko Knife
Puukko Knife
Hand forge a traditional Finnish belt knife. The Puukko is a small all purpose knife used for hunting, cooking and whittling. Students will forge and heat treat the blade, perform a flat grind on the blade and attach a handle made from 2 different woods. Finally a leather sheath will be fashioned.
3 events,
-
Adirondack Berry Picking and Gathering Basket
Adirondack Berry Picking and Gathering Basket
This basket is a variation on an Adirondack Pack Basket, one of the oldest surviving traditions inside the Adirondack Park. You will use a continuous weave technique and hand shaping to create this wonderfully useful basket. Bridle leather will be used to weave the strapping and create a strap that will leave your hands free for blueberry picking or any other type of gathering. It also makes a great container to keep your yarn when knitting socks. The approximate finished size is 10" - 12" tall (width may vary). This is a challenging class with lots of hand shaping.
-
Carved Knife Holder
Carved Knife Holder
Keep your kitchen knives nearby with this beautifully carved 13" x 5" knife holder. Students will learn to design, layout and carve their own designs.
-
Puukko Knife
Puukko Knife
Hand forge a traditional Finnish belt knife. The Puukko is a small all purpose knife used for hunting, cooking and whittling. Students will forge and heat treat the blade, perform a flat grind on the blade and attach a handle made from 2 different woods. Finally a leather sheath will be fashioned.
4 events,
-
Adirondack Berry Picking and Gathering Basket
Adirondack Berry Picking and Gathering Basket
This basket is a variation on an Adirondack Pack Basket, one of the oldest surviving traditions inside the Adirondack Park. You will use a continuous weave technique and hand shaping to create this wonderfully useful basket. Bridle leather will be used to weave the strapping and create a strap that will leave your hands free for blueberry picking or any other type of gathering. It also makes a great container to keep your yarn when knitting socks. The approximate finished size is 10" - 12" tall (width may vary). This is a challenging class with lots of hand shaping.
-
Carved Knife Holder
Carved Knife Holder
Keep your kitchen knives nearby with this beautifully carved 13" x 5" knife holder. Students will learn to design, layout and carve their own designs.
-
Weaving Birch Bark Ornaments
Weaving Birch Bark Ornaments
Using two sizes of prepared birch bark, students will weave a three-dimensional star and a reindeer ornament. Several types of birch bark beads will be taught to add on to the larger ornaments to create unique designs.
-
Puukko Knife
Puukko Knife
Hand forge a traditional Finnish belt knife. The Puukko is a small all purpose knife used for hunting, cooking and whittling. Students will forge and heat treat the blade, perform a flat grind on the blade and attach a handle made from 2 different woods. Finally a leather sheath will be fashioned.
1 event,
-
Complete Basic Blacksmithing
Complete Basic Blacksmithing
This basic class will give you the foundation needed to start out on your journey of blacksmithing. You'll learn fire management, hammering methods, drawing out, upsetting, cutting, splitting, twisting, and convenience bending along with a demo of forge welding. Make punches and chisels and learn to harden and temper them. Heating material and heat management will be taught and much more.
4 events,
-
Whimsical Wool Characters
Whimsical Wool Characters
This felting class will give you the opportunity to create an original character, such as a gnome or Santa. You are not limited to these images as you will be able to choose from a variety of wool fibers and colors. The techniques and process taught in this class will be the same for each character. All tools and wool are provided.
-
Complete Basic Blacksmithing
Complete Basic Blacksmithing
This basic class will give you the foundation needed to start out on your journey of blacksmithing. You'll learn fire management, hammering methods, drawing out, upsetting, cutting, splitting, twisting, and convenience bending along with a demo of forge welding. Make punches and chisels and learn to harden and temper them. Heating material and heat management will be taught and much more.
-
Birch Bark Picture Frames and Mirrors
Birch Bark Picture Frames and Mirrors
Birch bark picture frames and mirrors have adorned Adirondack camps and cabins for centuries and were a favorite winter project for the guides to make. This is a great class for beginners with limited experience with woodworking and tools. You will select a frame and learn how to cut and fasten the Birch bark, twigs and other natural objects to create your own 'masterpiece'. Come see why this is one of our most popular classes. You'll be proud to hang this in your home!
-
Saori Scarf Weaving
Saori Scarf Weaving
Saori Weaving is a freestyle form of weaving. A weaving technique known as clasp weft will be used. The selection of yarns and color is the main attraction with this scarf, which will be completed with twisted fringe. The looms will be warped and ready to go. Hand spun art yarn created by the instructor is included in the material cost, as well as a selection of commercially spun yarn to balance the structure. If you knit or crochet there’s a chance you have a stash of yarn that isn’t enough for a project than you just can’t part with. Bring it along to use or add to the collection of choices. This is a perfect stash busting project! The summer session will use yarns suitable for warmer weather.