Adirondack Folk School
Just another WordPress site

Adirondack Folk School

  1. Events
  2. Organizers
  3. Adirondack Folk School
Events from this organizer
Today

Build a Wee Lassie Canoe

The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.

Forging a Chef’s Knife

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

This class is taught by renowned instructor and the very first winner of History Channel's Forged in Fire, Matthew Parkinson. The chef's knife is the most used knife in almost any home. These iconic knives help to create meals for family and loved ones. Well-made kitchen knives can last a lifetime and this class will give you the opportunity to create one of your very own. In this two-day class students will make their own chef's knife from high carbon steel. All aspects of bladesmithing will be covered, from forging the blade to shaping, then heat treating, grinding and polishing, making and fitting a wooden handle and finally, sharpening - with very special attention given to the design and geometry of this kind of knife. This class is intended as an introductory bladesmithing class, but some forging experience is helpful.

Copper Bowl

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

In this class students will create a beautiful copper bowl from a 12" x 12" sheet of 16-gauge copper. Students will pound and hand tool the sheet into an 9" diameter, approx. 2" deep bowl. Students will also make a decorative vine with leaves from copper that will be attached to the rim of the bowl. Some soldering will be involved in this class.

Build a Wee Lassie Canoe

The original Wee Lassie was a lapstrake-built open cedar canoe made in 1863 by J. Henry Rushton of Canton, NY. Rushton was one of the most famous canoe builders of his era. George Washington Sears, who wrote of his adventures under his pen name of Nessmuk as he recorded his paddling adventures throughout the Adirondacks, popularized these small, finely crafted canoes. Come spend 11 wonderful days with master instructor Larry Benjamin building your own Wee Lassie. You will be guided through every step of the building process. Leave with a beautiful, lightweight canoe that handles well in the water. Open to all level of student.

Copper Ornaments

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

This copper ornament class will allow you to make your choice of 2 of the 3 items advertised. The process will have you cutting out the pieces, forming and texturing on an anvil. You will also be using a small torch as part of the texturing process, and soldering. The maple leaf ornament will have a "glass drop" soldered into the center. The mushroom can be used to hold your jewelry, earrings, and rings. The cap can be lifted off to slide rings on the stem. The stem is epoxied to a piece of bluestone serving as the base. The fern is a wall ornament that can be hung or laid in a windowsill. The fern is 10 inches tall, the maple leaf is 5 inches by 5 inches and the mushroom is 5 inches tall.

Forging a Chef’s Knife

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

This class is taught by renowned instructor and the very first winner of History Channel's Forged in Fire, Matthew Parkinson. The chef's knife is the most used knife in almost any home. These iconic knives help to create meals for family and loved ones. Well-made kitchen knives can last a lifetime and this class will give you the opportunity to create one of your very own. In this two-day class students will make their own chef's knife from high carbon steel. All aspects of bladesmithing will be covered, from forging the blade to shaping, then heat treating, grinding and polishing, making and fitting a wooden handle and finally, sharpening - with very special attention given to the design and geometry of this kind of knife. This class is intended as an introductory bladesmithing class, but some forging experience is helpful.

Champagne Baskets

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

Beverly was inspired to create this basket after Champagne corks were popped at her daughter’s wedding. Using the metal “muselet” and wire as the “mold” for this basket, she created a memento ornament for their first Christmas. The Muselet is the basket base, and the wire can be the inside or outside mold for your basket. Students will weave this basket with fine Ash to create their own memento. Muselet will be provided, or students may bring their own. Finished size is student’s choice, 1” – 5” tall. This is a miniature basket and therefore is challenging to work on. Moderate weaving experience will keep this class a low stress one day class.

Forging a Chef’s Knife

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

This class is taught by renowned instructor and the very first winner of History Channel's Forged in Fire, Matthew Parkinson. The chef's knife is the most used knife in almost any home. These iconic knives help to create meals for family and loved ones. Well-made kitchen knives can last a lifetime and this class will give you the opportunity to create one of your very own. In this two-day class students will make their own chef's knife from high carbon steel. All aspects of bladesmithing will be covered, from forging the blade to shaping, then heat treating, grinding and polishing, making and fitting a wooden handle and finally, sharpening - with very special attention given to the design and geometry of this kind of knife. This class is intended as an introductory bladesmithing class, but some forging experience is helpful.

Short Tote/Market Basket

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

This is an 8-10” version of a Penobscot Tote basket. Students will play with color and over layering spokes to create pattern and learn a new technique that is woven over the basic weaving to decorate this useful carryall.

Forging a Chef’s Knife

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

This class is taught by renowned instructor and the very first winner of History Channel's Forged in Fire, Matthew Parkinson. The chef's knife is the most used knife in almost any home. These iconic knives help to create meals for family and loved ones. Well-made kitchen knives can last a lifetime and this class will give you the opportunity to create one of your very own. In this two-day class students will make their own chef's knife from high carbon steel. All aspects of bladesmithing will be covered, from forging the blade to shaping, then heat treating, grinding and polishing, making and fitting a wooden handle and finally, sharpening - with very special attention given to the design and geometry of this kind of knife. This class is intended as an introductory bladesmithing class, but some forging experience is helpful.

Live Edge Bowl

Adirondack Folk School 51 Main St., Lake Luzerne, NY, United States

Come create a simple turned bowl that still looks and feels rustic due to its live edge. This course is targeted to those who have an interest in learning how to turn. The emphasis will be on learning how to use a lathe and tools safely and correctly. In this class, you will learn the basics of creating spindle-based objects and then work at turning your bowl. Leave the class with a lovely treasure that captures the "wild" feel of the Adirondacks!

Stenciled Floorcloth

Create your own floorcloth in either a traditional pattern, arts and crafts style or a game board pattern using environmentally safe water-based paints and finishes. You will learn to cut a stencil, choose a pattern and the odors of your choice.  Several different techniques will be taught as well. The use of painted floor coverings or "Oyl cloths" dates to 14th century Europe. People coming to this country wanted to reproduce furnishings from back home. Since resources were limited, worn sails from ships were painted and used to cover their floors. Floorcloths proved to be one of the most durable floorcoverings providing extra insulation on the floors of drafty homes. Create your own artful and durable floorcloth that will last for generations.

Join the Waiting List We are sorry, but this course is currently full. If space(s) become available, we will notify users in the order in which they requested to be added to the waiting list.